Projects
Hessian scientists of various disciplines are using High Performance Computers for their research.
Projects
Kategorie
Jahr
Software
Universität
Cluster
Projekte
Displaying 1 - 30 of 77
Controlling the Aggregation of Phosphorescent alkynyl-Pt-NHC Complexes via Silyl-DED Substitution
Non-covalent interactions (NCIs) not only govern the structure biomacromolecules such as proteins and DNA, but often ...
Natural SciencesPhysical and Theoretical Chemistry
Approximate Bayesian Decision Theory With Neural Networks
Bayesian observer and actor models have provided normative explanations for many behavioral phenomena in perception ...
Humanities and Social Sciences
End-to-end Learning for Multi-Embodiement Locomotion
The rapid development of robotics has enabled legged robots capable of performing highly dynamic tasks such as walking ...
Engineering SciencesComputer Science
Flexible HP-Turbines III
Over the last decades, turbomachinery has been subject of continuous improvement and fundamental research within the ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Gasification Processes with Integrated Surplus Electricity Integration for Flexible Power Generation and Production of Synthetic Fuels from Residual Materials (VERENA) II
Project VERENA aims to open new recycling paths for biogenic and municipal residues through different gasification ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Influence of Mixing Characteristics on Polymerization Reactors
The industrial production of high-density polyethylene (HDPE) through the catalytic polymerization of ethene is an ...
Engineering SciencesProcess Engineering, Technical Chemistry
Numerical Analysis of Iron Dust/Air Combustion
Iron powder can help in a clean and sustainable generation of heat and power and holds the potential to replace ...
Engineering Sciences
Parametric Study on Determination of Load-Bearing Capacity of Dry-stacked Masonry Wall under Cyclic Loading
In the research area of circular building design, design concepts for sustainable masonry are being implemented using ...
Engineering SciencesConstruction Engineering and Architecture-
Preliminary Study for Power Forecasting of Machines in Industrial Production Systems With Neural Networks
Germany has the ambitious goal of covering all electricity generation by renewable sources by 2045. The Kopernikus ...
Engineering SciencesMechanics and Constructive Mechanical Engineering 
Structure Optimization, Dielectric and Magnetic Properties of Pure Silicon as well as Iron-Doped Silicon and Tin Clusters
The previous investigation of SnN clusters with N = 6−40 showed that below a clusters size of about 30 atoms, a prolate ...
Natural SciencesPhysical and Theoretical Chemistry-
Utilizing Mamba for Microorganism Protein Synthesis Prediction
This work aimed to apply deep learning, specifically Mamba, to the problem of codon optimisation in order to be able to ...
Engineering SciencesComputer Science 
Competence Development of Engineering Methodology for the Design of Centrifugal Compressors
A decisive property of centrifugal compressors for turbochargers is the map width, which defines the area of the ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Deep Reinforcement Learning for Robotics
Robotics platforms can massively benefit from novel Deep Reinforcement Learning approaches. However, robotics have ...
Engineering SciencesComputer Science
Deriving of Design Guidelines for Cold Flow Combustors Based on Flow Phenomena in Combustors Under Real Operating Conditions
A jet engine’s high-pressure turbine, which is located downstream of the combustor, is subject to an extremely high ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Detecting Suitcase Damages With Artificial Intelligence – IT-Project Lufthansa
Artificial intelligence is currently developing faster than ever and introduces many different possibilities. Our client ...
Engineering SciencesComputer Science
Flexible HP-Turbines
The fluid temperatures in the high-pressure turbine of a commercial jet engine or industrial gas turbine by far exceed ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
High-Throughput Design of Chalcogenide Materials for Optoelectronic Devices
Optoelectronic materials have attracted significant attention owing to the global energy shortage and environmental ...
Engineering SciencesMaterials Science
Investigation of Spin Isomers in SnNFe with N = 8-16
In the framework of the Collaborative Research Center (CRC 1487), iron is studied as a substitute for rare-earth metals ...
Natural SciencesPhysical and Theoretical Chemistry
Reliability of Statically Indeterminate Concrete Beams With GFRP Reinforcement
Structural engineering, particularly concrete systems, has long focused on understanding the distribution of internal ...
Engineering SciencesConstruction Engineering and Architecture
Structure Discrimination and Magnetic Properties of FeSnN with N =8–15
In the framework of the Collaborative Research Center (CRC 1487), iron is studied as a substitute for rare-earth metals ...
Natural SciencesPhysical and Theoretical Chemistry
Understanding and Exploiting an Iron Catalysed Route to New Chemical Synthons II
The project focuses on an iron catalysed method to prepare unprecedented chemical synthons, developed in the group of Dr ...
Natural SciencesPhysical and Theoretical Chemistry
Unsteady 1-Way Coupling of Combustor and High-Pressure Turbine II
The flow conditions at the combustor turbine interface (CTI) have a significant role in the development process of ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
CFD Analysis of Particle Emissions During Highly Transient Engine Operation
Soot is an unwanted particulate pollutant with detrimental impact on the human health and climate change. Its emission ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Chemical Looping Gasification for Sustainable Production of Biofuels (CLARA)
Project CLARA aims to develop Chemical Looping Gasification (CLG) technology from lab scale to industrial scale. CLG can ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Gasification Processes with Integrated Surplus Electricity Integration for Flexible Power Generation and Production of Synthetic Fuels from Residual Materials (VERENA) I
Project VERENA aims to open new recycling paths for biogenic and municipal residues through different gasification ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Influence of Mixing Processes on the Performance of High-Pressure Polymerization II
At industrial scale low-density polyethylene (LDPE) is produced at pressures up to 3000 bar in autoclave or tubular ...
Engineering SciencesProcess Engineering, Technical Chemistry
Optical Spectroscopy, Dielectric Properties and Structure Discrimination of SnN (20 ≤ N ≤ 40)
The previous investigation of neutral SnN clusters with N = 6 - 20 showed that for clusters with N ≤ 15 prolate ...
Natural SciencesPhysical and Theoretical Chemistry
Performance Analysis of the Ice-Sheet and Sea-Level System Model (ISSM)
Earth modeling is a wide field of different scientific domains, e.g., ice-modeling. All domains have in common, that ...
Engineering SciencesComputer Science
Performance Enginnering of the Confined Unconfined Aquifer System Model (CUAS)
In the context of earth system modeling the simulation of ice-sheets is an important aspect. Ice-sheet modeling contains ...
Engineering SciencesComputer Science
Structure Discrimination of SnNGa with N = 9–15
Since semiconductors are fundamental for modern technologies, the research is focused on such materials and their ...
Natural SciencesPhysical and Theoretical Chemistry
