Projects
Hessian scientists of various disciplines are using High Performance Computers for their research.
Projects
Kategorie
Jahr
Software
Universität
Cluster
Projekte
Displaying 31 - 60 of 211
exaFOAM - Performance Analysis and Modeling of OpenFOAM
The exaFOAM project (https://exafoam.eu) aims at overcoming the current limitations of Computational Fluid Dynamics (CFD ...
Engineering SciencesComputer Science
Flow in Concentric Annulus with Inner- or Outer-Cylinder Rotation: A Conventional and Sensitized RANS Modelling Study
Fully developed turbulent flow in a concentric annulus with one or both walls rotation is essential in various ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Gasification Processes with Integrated Surplus Electricity Integration for Flexible Power Generation and Production of Synthetic Fuels from Residual Materials (VERENA) I
Project VERENA aims to open new recycling paths for biogenic and municipal residues through different gasification ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Generation of Training Data for a Gaussian Process Based Surrogate Model
This project was a follow-up project for our initial project intended at setting up Lichtenberg Cluster for the use ...
Engineering Sciences-
Gradient-Based Variational Inference by Policy Search
In variational inference, we want to approximate an intractable target distribution (often given as a posterior ...
Engineering SciencesComputer Science -
Implementation and Validation of an Approach for Statistical Parameter Calibration
The prediction accuracy of models is affected using deterministic parameters. That is because the uncertainty of these ...
Engineering SciencesMechanics and Constructive Mechanical Engineering 
Influence of Mixing Processes on the Performance of High-Pressure Polymerization II
At industrial scale low-density polyethylene (LDPE) is produced at pressures up to 3000 bar in autoclave or tubular ...
Engineering SciencesProcess Engineering, Technical Chemistry
Investigation of Turbulent Inlet Boundary Conditions of Swirled Flows in Gas Turbine Combustors
The general purpose of this project was to investigate the capabilities of the Proper Orthogonal Decomposition Fourier ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Modelling of the Deformation Behaviour of Metal-Matrix-Composite Material with Brittle Cores
Permanent magnets are the key component of electric motors and generators, which currently have a high demand in the ...
Engineering SciencesProduction Technology
Multiphysics Simulation of Reactive Bubbly Flows
Historically, CFD codes implementing arbitrary Lagrangian Eulerian interface tracking (ALEIT) for the simulation of ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Multiscale Modelling of Cement-Based Materials
Overall objective of this project is to develop an elementary physical/chemical bridging model for the chemical reaction ...
Engineering SciencesConstruction Engineering and Architecture
Numerical Investigation and Cause-and-Effect Chain Analysis of Cyclic Variations and their Effect on Knocking Combustion
Knocking combustion in an internal combustion engine is initiated by auto-ignition ahead of the flame front. Thus ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Numerical Investigation of Drop Impact, Coalescence and Evaporation on Superheated Surfaces III
Spray cooling is a very effective method for cooling of electronic devices. The study of the impact of single and ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Numerical Simulation of the Interaction Between a Drop and a Liquid Wall Film
In internal combustions engines and in systems for exhaust gas aftertreatment, sprays interact with liquid wall films ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Optimized Scaling of ISSM
In previous project we investigated on the scaling and the load balancing of the Ice-sheet and Sea-level System Model ...
Engineering SciencesComputer Science-
Performance Monitoring for Future Exascale Systems
Typical HPC applications represent simulations of large scientific problems. Usually, these applications alternate ...
Engineering SciencesComputer Science 
Race Car - Aerodynamics
Aerodynamics is one of the key factors in motorsport. This project aims the development and optimization of an ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
RUBI (Reference Multiscale Boiling Investigation) Simulation
Due to its high efficiency nucleate boiling is a promising process for the cooling of electronic devices either for ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics-
Sensitivity Analysis of a Complex Multibody System
This project was a follow-up project for our initial project intended at setting up Lichtenberg Cluster for the use ...
Engineering Sciences 
Simulation of High-Pressure Spray Flames III
The formation of pollutants in direct injection engines is a field of research with high practical impact. Against this ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Wind Field Simulation for Operation of UAS in Urban Environments
For the coming years, a strongly growing use of unmanned aerial vehicles (UAV) of all classes is predicted, for example ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Ab-initio Modeling of Battery Materials
One approach to the realization of safer batteries relies on all solid-state batteries (ASSB) which use a non-flammable ...
Engineering SciencesMaterials Science
Ab-Initio Thermodynamics of Refractory Mo-Si-Ti Phases at High Temperatures
Refractory metal silicide systems like Mo-Si-Ti are expected to be ideal substrates in composite materials for high ...
Engineering SciencesMaterials Science
Aeroacoustics Simulation Using Partially-Averaged-Navier-Stokes Model
In recent years studying the field of aeroacoustics has been received special attention from researches for its ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Algorithm Unfolding in Multicell Downlink MIMO Precoding
In wireless communications, beamforming is utilized for the reception and transmission of directional wireless signals ...
Engineering SciencesElectrical Engineering and Information Technology
Assessment of the Spray, Chemistry and Turbulence Coupling and its Modeling in Numerical Simulations of Reactive Multiphase Flows
From a practical standpoint, the combustion of liquids includes multiple interwoven processes, such as the gradual ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Automatic Code Parallelization
The Software-Factory 4.0 (SF4.0) is a 4-year LOEWE1 project funded by the German State of Hesse and involves several ...
Engineering SciencesComputer Science
Calculating Temperature Dependent Properties of 2D Magnets
Predicting the temperature dependent properties of magnetic materials is still challenging, which cannot be dealt with ...
Engineering SciencesMaterials Science
Coupled Eulerian Stochastic Field Method with FGM-Based Detailed Tabulated Chemistry Approach for LES/RANS of Sandia Flame Series D-E and F
The objective of this project is to compute the turbulence chemistry interactions for turbulent reacting flow. Thus, the ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Deep Reinforcement Learning: Benchmarking, Algorithms and Applications
Deep Learning is the major component of the success of most new Artificial Intelligence applications. A new promising ...
Engineering Sciences
