Projects
Hessian scientists of various disciplines are using High Performance Computers for their research.
Projects
Kategorie
Jahr
Software
Universität
Cluster
Projekte
Displaying 31 - 60 of 123
Efficient Integration of Physically Enhanced Neural Networks in Particle-Resolved CFD Simulations of Industrial Packed-Bed Reactors
The investigation of novel or optimizing established processes is of paramount importance in chemical engineering in the ...
Engineering SciencesProcess Engineering, Technical Chemistry
End-to-end Learning for Multi-Embodiement Locomotion
The rapid development of robotics has enabled legged robots capable of performing highly dynamic tasks such as walking ...
Engineering SciencesComputer Science
exaFOAM Performance Analysis and Modeling
The exaFOAM project [1] aims at overcoming the current limitations of Computational Fluid Dynamics (CFD) technology ...
Engineering SciencesComputer Science-
Fault Tolerance and Locality-Aware Work Stealing for Dynamically Generated Dependent Tasks on Clusters
Programming environments for today’s supercomputers must support the design of efficient programs and handle issues such ...
Engineering SciencesComputer Science 
Flexible HP-Turbines III
Over the last decades, turbomachinery has been subject of continuous improvement and fundamental research within the ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Gasification Processes with Integrated Surplus Electricity Integration for Flexible Power Generation and Production of Synthetic Fuels from Residual Materials (VERENA) II
Project VERENA aims to open new recycling paths for biogenic and municipal residues through different gasification ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Influence of Mixing Characteristics on Polymerization Reactors
The industrial production of high-density polyethylene (HDPE) through the catalytic polymerization of ethene is an ...
Engineering SciencesProcess Engineering, Technical Chemistry-
Investigation of the Phase Separation Process of Polymer-Monomer Mixtures II
The polymerization of low-density polyethylene takes place at high temperatures and pressures up to 3000 bar. Under ...
Engineering SciencesProcess Engineering, Technical Chemistry -
Learning Force Distribution Estimation for the GelSight Mini Optical Tactile Sensor Based on Finite Element Analysis
Up-to-date contact-rich manipulation tasks remain one of the grand challenges of robotics. Equipping robots with a sense ...
Engineering SciencesComputer Science 
Learning Mean Field Games on Sparse Graphs
Learning the behavior of large agent populations is an important task for numerous research areas. Although the field of ...
Engineering SciencesComputer Science
Major-Minor Mean Field Multi-Agent Reinforcement Learning
Multi-agent reinforcement learning (MARL) remains difficult to scale to many agents. Recent MARL using Mean Field ...
Engineering SciencesComputer Science
Multi-Model Multi-Phase Cause-Effect Chain Simulation in Direct Injection Engines
Internal combustion engines are vital to the modern transportation sector, and ongoing research is essential to optimize ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Multiscale Modelling of Cement-Based Materials III
The project seeks to create a comprehensive model linking nanoscale phenomena to larger-scale behaviors to better ...
Engineering SciencesConstruction Engineering and Architecture
Numerical Analysis of Iron Dust/Air Combustion
Iron powder can help in a clean and sustainable generation of heat and power and holds the potential to replace ...
Engineering Sciences
Numerical Investigation of Drop Impact, Coalescence and Evaporation on Superheated Surfaces V
Spray cooling is a very effective method for cooling of electronic devices. The study of the impact of single and ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Numerical Investigation of Drop Impact, Coalescence and Evaporation on Superheated Surfaces VI
Spray cooling is a very effective method for cooling of electronic devices. The study of the impact of single and ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Parallel Finite Element Methods for Complex Flows of Complex Fluids
The objective of this ongoing project is the continuous development and advancement of effective simulation methods for ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Parameter-Efficient Tuning of Pretrained Visual-Language Models in Multitask Robot Learning
General-purpose intelligent robots are expected to simultaneously handle multiple tasks while interpreting various ...
Engineering SciencesComputer Science-
Parametric Study on Determination of Load-Bearing Capacity of Dry-stacked Masonry Wall under Cyclic Loading
In the research area of circular building design, design concepts for sustainable masonry are being implemented using ...
Engineering SciencesConstruction Engineering and Architecture -
Preliminary Study for Power Forecasting of Machines in Industrial Production Systems With Neural Networks
Germany has the ambitious goal of covering all electricity generation by renewable sources by 2045. The Kopernikus ...
Engineering SciencesMechanics and Constructive Mechanical Engineering 
Quantification of Turbulent Coflow Effects on Liquid Fuel Atomization from a Pressure Swirl Atomizer
In response to the growing need for sustainable energy solutions and emission reduction, gas turbines offer a viable ...
Engineering SciencesProcess Engineering, Technical Chemistry
Reducing Pollutant Emissions in Sustainable Aero-Engine Combustors
Reducing pollutant emissions remains a key challenge in the development of nextgeneration aero-engines. In addition to ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Simulation of in-situ Alloying of High Entropy Alloys During Additive Manufacturing Using Molecular Dynamics
Laser powder bed fusion (LPBF) is an additive manufacturing technology involving a gradual build-on of layers to form a ...
Engineering SciencesMaterials Science-
Tracing CPU/GPU-Hybrid Applications With Extrae
Starting from the initial project idea outlined in the project proposal, the research evolved significantly, branching ...
Engineering SciencesComputer Science -
Utilizing Mamba for Microorganism Protein Synthesis Prediction
This work aimed to apply deep learning, specifically Mamba, to the problem of codon optimisation in order to be able to ...
Engineering SciencesComputer Science -
Advanced Modeling Strategies for Turbulent Hydrogen Flames
The German government’s National Hydrogen Strategy has identified hydrogen as a crucial technology in achieving the ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics -
Aeroacoustics Simulation Using Partially-Averaged-Navier-Stokes Around the Ahmed Body
Aeroacoustics is a critical research field that studies sound generated by turbulent flows interacting with solid ...
Heat Energy Technology, Thermal Machines, Fluid MechanicsEngineering Sciences -
Amortized Variational Inference by Policy Search
Variational inference with Gaussian mixture models (GMMs) can be used to learn highly tractable approximations of ...
Engineering SciencesComputer Science 
Combustion of Individual Iron Microparticles With Resolved Boundary Layers I
Metal fuels are promising green energy carriers due to their high volumetric energy density, recyclability, and ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
Competence Development of Engineering Methodology for the Design of Centrifugal Compressors
A decisive property of centrifugal compressors for turbochargers is the map width, which defines the area of the ...
Engineering SciencesHeat Energy Technology, Thermal Machines, Fluid Mechanics
